Shaiya bot
Re: Shaiya bot
Could someone please tell me where I would start to add new script, were it hits lagged mobs, and continues to say wrong target untill death, I want to make it switch to a new target, also if there is a object in the way to add a jump or switch target, any info would be greatly appreciated.
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
Start with the logic behind it. Figure out what needs to be done, first. If you are unable to reach your target within, say, 30 seconds, then you should try jumping (press the jump button) and/or an assortment of other buttons. If you still have not reached and killed the monster within, lets say, a minute and a half, you should abandon the target by pressing the target next key.
I know I've posted the code to this before in the other Shaiya topics. Look it there.
I know I've posted the code to this before in the other Shaiya topics. Look it there.
Re: Shaiya bot
hey in regards to the gameguard patch is the multi-client possibility being looked at still?
thanks.
thanks.
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
Whoever fixed the 'bomber.exe' that is circulating beat me to it. The multi-client that I worked on gave a GameGuard error (although the game was not otherwise effected by GameGuard), and Ploxasaurus/Jewbaca's approach didn't work all together. The bomber.exe should allow you to run two clients, so long as you've made the adjustments to your launcher to start bomber.exe instead of game.exe.
Re: Shaiya bot
I'm getting this error:
...\micromacro\scripts\shaiya.lua:194: bad argument #1 to 'memoryReadIntPtr' <<null>>
What should I do?
...\micromacro\scripts\shaiya.lua:194: bad argument #1 to 'memoryReadIntPtr' <<null>>
What should I do?
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
I've already responded to your other thread here. Get the GameGuard bypass from the very first topic in this thread and install it using those instructions. It will not work without the new game.exe!
Re: Shaiya bot
In regards to having multi client, is there really any use to it? I mean for the micromacro scripts to work they need focus of the game. So I don't really see the benefit of being able to have two game clients open.
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
At the current time, no. Not for botting. Some people may still use a multi-client patch to allow them to power level their other characters, or to trade items. It may, however, be possible later down the road to write a plugin that will work with multiple clients.
Re: Shaiya bot
no matter how i set the micromarcro, it doesnt sit. and when it does, it doesnt come back up to atk mobs. i usually set it to 50% hp to sit. but seems like it never works ><" please help~~ thanks~
Re: Shaiya bot
hey..i downloaded everything..scripts..bypass..created loader...everything..read all the posts...
i have a few problems..how do u open the script files to configure them..i know u said right click>openwith>micromacro..i did tht..but the script doesnt open..micromacro opens instead..tht used to happen..now i click openwith..and nothing happens..nothing opens..as in..nothing..it keeps recommending internet explorer to open it..i tried selecting micromacro to open it..but no:S..it just goes back to the previous page..is there any other way to open the file?i tried wot u had said..keep it outside the micromacro folder ..i tried tht..nothings working..and does shaiya and micromacro have to be in same drive?coz my shaiya is in E and micromacro is in C drive..
i tried initializing micromacro without configuring it..and the log kept saying..target status=0 like a million times..help plz..need to bot..
PS(im using vista and the latest micromacro)..i also tried opening the script with windows wordpad..is tht k?
my desktop resolution is 1280x800 and my shaiya runs at 1024x768..jus writin this coz i dont know whether it makes a difference or not..listing all possibilities..i start micromacro..nothing happens..absolutely nothing..it says started..but nothing seems to happen..
i have a few problems..how do u open the script files to configure them..i know u said right click>openwith>micromacro..i did tht..but the script doesnt open..micromacro opens instead..tht used to happen..now i click openwith..and nothing happens..nothing opens..as in..nothing..it keeps recommending internet explorer to open it..i tried selecting micromacro to open it..but no:S..it just goes back to the previous page..is there any other way to open the file?i tried wot u had said..keep it outside the micromacro folder ..i tried tht..nothings working..and does shaiya and micromacro have to be in same drive?coz my shaiya is in E and micromacro is in C drive..
i tried initializing micromacro without configuring it..and the log kept saying..target status=0 like a million times..help plz..need to bot..
PS(im using vista and the latest micromacro)..i also tried opening the script with windows wordpad..is tht k?
my desktop resolution is 1280x800 and my shaiya runs at 1024x768..jus writin this coz i dont know whether it makes a difference or not..listing all possibilities..i start micromacro..nothing happens..absolutely nothing..it says started..but nothing seems to happen..
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
Of what little I did understand of what you wrote, it looks like you're doing a few things wrong. First, to configure the script, you open it in notepad, not Internet Explorer or MicroMacro. Second, you should put shaiya.lua into the micromacro/scripts/ directory. Third, open MicroMacro by double-clicking micromacro.exe, and then type in "shaiya.lua" (without quotes), and press enter.3. Type like an adult. That means not posting 'sentences' like "lul hay guise can i has a hax plox." This will not result in a ban, but I reserve the right to make fun of you.
No. They do not. As long as you have launched Shaiya using the launcher bypass mentioned in the first post of this thread, then you launch MicroMacro and run the Shaiya script, you should be set.does shaiya and micromacro have to be in same drive?
Impossible. The script does not contain that phrase. Did you mean "TARGETID: 0"? Post your log.txt file for review. Please, only the first 100 lines if it's more than that.and the log kept saying..target status=0 like a million times
You also need to be more specific. Does the target warning appear in the console (MicroMacro's window), in the log, or both? Does Shaiya appear to be receiving any input from MicroMacro? That is, does your character move, attempt to activate any skills, anything? Do any other errors appear?
Re: Shaiya bot
sorry.here is my very adultlike post .
And no i dont think shaiya is recieving anything from micromacro.My char doesnt move at all.the script seems to be loaded fine.i changed buffs,skills etc. to "0".i just want my char to atk,pickup items,and sit to heal.
in micromacro it says TARGETID -1 .
and in the logfile it says:-(it says access denied.its my personal computer and i am using admin account)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x62fad4 in memoryReadShort(). Error code 5 (Access is denied.)
And no i dont think shaiya is recieving anything from micromacro.My char doesnt move at all.the script seems to be loaded fine.i changed buffs,skills etc. to "0".i just want my char to atk,pickup items,and sit to heal.
in micromacro it says TARGETID -1 .
and in the logfile it says:-(it says access denied.its my personal computer and i am using admin account)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x7835b4 in memoryReadIntPtr(). Error code 5 (Access is denied.)
Tue Jul 29 23:45:44 2008 : WARNING: Failure reading memory from 0xB8E068 at 0x62fad4 in memoryReadShort(). Error code 5 (Access is denied.)
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
There is one of three things wrong, then.
- You did not properly install the no GameGuard patch, or did not set up a launcher properly
Vista is garbage and is preventing you from having access to what you should have access to
The new GameGuard patch is broken. I had not tested it, and assumed it worked.
Re: Shaiya bot
I think i did overwrite correctly..because if i didnt shaiya wouldnt open..it does open WITHOUT gameguard..im using the new micromacro.the changelog says its compatible with vista..then why wont it work on my system??
Oh and i was reading a post on page 1. one guy posted this:-
-------------------------------------------------
-- Variable declaration -- do not edit
-------------------------------------------------
CLASS_WARRIOR = 0;
CLASS_MAGE = 1;
HP = 10000;
HPmax = HP;
MP = 10000;
MPmax = MP;
SP = 10000;
SPmax = SP;
etc...
My shaiya.lua doesnt have all this.
Oh and u had said that the loader target should look like"C:\Program Files\AeriaGames\Shaiya\game.exe start game"
But when i add start game to the end it says path and name is not valid.
[cud u reply with ure email id too plz..thanks]
Oh and i was reading a post on page 1. one guy posted this:-
-------------------------------------------------
-- Variable declaration -- do not edit
-------------------------------------------------
CLASS_WARRIOR = 0;
CLASS_MAGE = 1;
HP = 10000;
HPmax = HP;
MP = 10000;
MPmax = MP;
SP = 10000;
SPmax = SP;
etc...
My shaiya.lua doesnt have all this.
Oh and u had said that the loader target should look like"C:\Program Files\AeriaGames\Shaiya\game.exe start game"
But when i add start game to the end it says path and name is not valid.
[cud u reply with ure email id too plz..thanks]
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
You're certain that GameGuard did not start? If that's the case, try this:
Do you have UAC enabled or disabled?1. Vista Compatibility
In order to get MicroMacro to run properly in Windows Vista, you must change some settings.
First, right click on micromacro.exe, and select Properties.
Now, check "Run as Administrator", and run in compatibility mode for
Windows XP Service Pack 2. Now you can open micromacro.exe and all should
work just fine.
Use code tags. That's also for an old version of the script.Oh and i was reading a post on page 1. one guy posted this:-
Re: Shaiya bot
ugh. Nope its still not working.yeh gg doesnt start.
i tried the vista thing.still not working.
the Log doesnt say anything anymore.
This is all it says.nothing after that
Wed Jul 30 01:18:13 2008 : MicroMacro v0.97
Wed Jul 30 01:18:13 2008 : Processor Type: 2X 586, OS: Windows XP Service Pack 2
Wed Jul 30 01:18:13 2008 : Lua initialized successfully.
Wed Jul 30 01:18:13 2008 : Lua libs opened successfully.
Wed Jul 30 01:18:13 2008 : Lua glues exported.
Wed Jul 30 01:18:13 2008 : Keyboard layout: US English
Wed Jul 30 01:18:13 2008 : Configurations run.
Wed Jul 30 01:18:17 2008 : Executing script "shaiya.lua".
==================================================
when i open micromacro. it says
"Started.
TARGETID: - 1" nothing more.when i attack a monster myself that time it says TARGETID: 36 or something. But it doesnt attack on its own:(
Please u must have some solution.why wont it work??
i tried the vista thing.still not working.
the Log doesnt say anything anymore.
This is all it says.nothing after that
Wed Jul 30 01:18:13 2008 : MicroMacro v0.97
Wed Jul 30 01:18:13 2008 : Processor Type: 2X 586, OS: Windows XP Service Pack 2
Wed Jul 30 01:18:13 2008 : Lua initialized successfully.
Wed Jul 30 01:18:13 2008 : Lua libs opened successfully.
Wed Jul 30 01:18:13 2008 : Lua glues exported.
Wed Jul 30 01:18:13 2008 : Keyboard layout: US English
Wed Jul 30 01:18:13 2008 : Configurations run.
Wed Jul 30 01:18:17 2008 : Executing script "shaiya.lua".
==================================================
when i open micromacro. it says
"Started.
TARGETID: - 1" nothing more.when i attack a monster myself that time it says TARGETID: 36 or something. But it doesnt attack on its own:(
Please u must have some solution.why wont it work??
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
Try logging into a different user account (not Administrator account, but administrator permission is fine) and try again. It might be Vista blocking the memory reading/writing functions from affecting Administrator processes. You should not ever be logged into Administrator unless you are trying to recover from serious problems (viruses, drivers, etc.), or need to create a new account.
Try this, as well. Open shaiya.lua in notepad, and look for this line:
Below that, add this:
Now when you run the script, it should output the process handle. Tell me what that is.
Try this, as well. Open shaiya.lua in notepad, and look for this line:
Code: Select all
proc = openProcess(findProcessByExe("game.exe"));
Code: Select all
printf("Process handle: %d\n", proc);
Re: Shaiya bot
i yet have to try it in another user account.
i tried in the same admin account after inserting that line you told me to.i checked the log.
it says this:-
Wed Jul 30 02:18:24 2008 : ...ogram Files\micromacro\micromacro\scripts\shaiya.lua:285: C:\Program Files\micromacro\micromacro\lib\lib.lua:97: bad argument #2 to 'format' (number expected, got userdata)
Wed Jul 30 02:18:24 2008 : Execution of shaiya.lua complete.
Wed Jul 30 02:18:24 2008 : Execution error: Runtime error
Wed Jul 30 02:18:24 2008 : Collecting garbage...
Wed Jul 30 02:18:24 2008 : 5KB freed.
i tried in the same admin account after inserting that line you told me to.i checked the log.
it says this:-
Wed Jul 30 02:18:24 2008 : ...ogram Files\micromacro\micromacro\scripts\shaiya.lua:285: C:\Program Files\micromacro\micromacro\lib\lib.lua:97: bad argument #2 to 'format' (number expected, got userdata)
Wed Jul 30 02:18:24 2008 : Execution of shaiya.lua complete.
Wed Jul 30 02:18:24 2008 : Execution error: Runtime error
Wed Jul 30 02:18:24 2008 : Collecting garbage...
Wed Jul 30 02:18:24 2008 : 5KB freed.
- Administrator
- Site Admin
- Posts: 5313
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Shaiya bot
I thought that might happen. Well, I think it's safe to assume it opened properly. Let me know what happens with that other account.
Re: Shaiya bot
k will try with other account soon..shud i delete the line u asked me to insert?
Who is online
Users browsing this forum: No registered users and 0 guests