Obviously I would like to share it with you
Code: Select all
Follow the following steps:
1) Copy Game Data
2) Install .NET framework 4.0
3) Install Microsoft Visual C++ 2010 Redistributable Package
4) In-game Setting
5) TNT Setting
1) Copy Game Data
Get your D3 directory, under Diablo III\Data_D3\PC, There is folder called MPQs
Copy the MPQs into a seperate place, e.g. D:\MPQs (Make sure your D3 client is closed before doing this)
The size of this folder is varient, it depends what languages you have installed, approx. 7-12GB
*When setting the TNT, the MPQs needed MUST be an isolated clone version as the same one used by the game client, therefore this step is a MUST! It cannot be the one in your game directory
2) Install .NET framework 4.0
Install .NET framework 4.0 (if you have 4.5, remove it!), you may find it from the Microsoft Download Center
Microsoft .NET Framework 4 (Standalone Installer)
3) Install Microsoft Visual C++ 2010 Redistributable Package
If you are using x64 version of Windows, download and install both of them,
If you are using x86 version of Windows, download and install only the x86 version. (The second one)
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2010 Redistributable Package (x86)
4) In-game Setting
i) Set your D3 client to full-screen with 1024x768 or 1280x1024 solution located at the Video section
(Do NOT use any 16:9 or 16:10 kinda resolution)
ii) Set your Foreground and Background FPS to 25-35
(too low will cause TNT malfunction, too high will waste your computer resources)
iii) Do NOT tick the Letterbox
iv) In the Gameplay section, Make sure do NOT tick the Zoom When Your Inventory Is Open
(otherwise you cannot sell anything)
v) Set the D3 Client back to windowed
5) TNT Setting
i) When running TNT for the first time, you'd get this
ii) Set your MPQs directory location.
iii) Enter your TNT username and password, for 24h trial, trialD3US / trial
iv) Upon successful login, you will see your remainning time for your card, card type, etc
v) Assume your D3 client is up, login to the game, pick any scene.
vi) theConnect to Diablo 3 button is up, click the button, and click back to your D3 Client
vii) You shall see the Initialize is completed box pop-up, your D3 client is forced to be 4:3 windowed mode.
viii) Now this is very important, do it everytime before you start anything; Move your cursor to the buttom edge of the windowed D3 Client, the cursor will be changed to a narrow, click on it once or slightly shrink your client a little bit, you may see your clients' font change from blur to clear
ix) As you see your Class Script and Profile is loaded, press start
Dowloads
- http://en.tntd3.com/forum.php?mod=forumdisplay&fid=54