waypoint stuff

Runes of Magic/Radiant Arcana (http://www.runesofmagic.com)
Message
Author
User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#21 Post by beanybabe » Thu Aug 13, 2015 10:07 am

I got your function to run but getElements I had never seen before I searched and found a description of its use here.

http://www.solarstrike.net/phpBB3/viewt ... ents#p1476
It looks like something handy I need to learn more about.

EI_01_InTheValley_converted was the output of your function it created 527 waypoints. But not quite what I had envisioned. I was wanting to go line by line and output the non waypont lines as well, to keep the basic flow of the original that can be then cut up and reformatted.

If I am understanding this getElements the way you used it would not allow the line by line output of wp and code. But reading that url I listed it seems there is a way to us it to do line by line reading.

Instead of this
  • EI_01_InTheValleypoints = {
    player:moveTo(CWaypoint(31954, 3278),true)
    player:moveTo(CWaypoint(31978, 3441),true)
    player:moveTo(CWaypoint(31932, 3733),true)
    player:moveTo(CWaypoint(31880, 4091),true)
    player:moveTo(CWaypoint(31835, 4202),true)
Id like to get this:
  • <?xml version="1.0" encoding="utf-8"?><waypoints type="RUN">
    <!-- This is a series of waypoint files that will complete a walk-through of the entire Elven Island quest series. -->
    <!-- Required userfunctions: userfunction_teleport and userfunction_questHelpers -->
    <!-- EI_01_InTheValley will complete all quests inside the Valley of Perparation -->
    <!-- Approximate Runtime: 35 Minutes -->
    <onload>
    __WPL:setWaypointIndex(1)
    </onload>
    player:moveTo(CWaypoint(31954, 3278),true)
    player:target_NPC(112793) -- Gamunhan
    AcceptQuestByName(422241) -- Getting to Know Yourself
    CompleteQuestByName(422241) -- Getting to Know Yourself
    AcceptQuestByName(422242) -- Elven Academy
    </waypoint> <<<< --------------------- I dont know if this would be left or not but it needed removed.
    player:moveTo(CWaypoint(31978, 3441),true)
    player:moveTo(CWaypoint(31932, 3733),true)
    player:moveTo(CWaypoint(31880, 4091),true)
    player:moveTo(CWaypoint(31835, 4202),true)

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#22 Post by beanybabe » Thu Aug 13, 2015 10:30 am

This code is from the logger function, if your wp convert code could be merged in some how it should do the trick. I am still new to file io and this is as far as I can go at this time. I looked at doing this with regix and some editor but got lost on getting the x and y z coordinates I guess it should have z coordinates also to translate the original file as close to original as possible.
This would make converting existing wp into functions a lot easier.

Code: Select all

	--=== code riped from Noobbotter's logPlayer function
local logFileName = "scripts/rom/logs/BotSummary.txt" -- you can specify what filename or directory you want here.

function file_exists(_filename)
	local f=io.open(_filename,"r")
	if f~=nil then 
		io.close(f) 
		return true 
	else 
		return false 
	end
end
function logPlayer()
	if not file_exists(logFileName) then
		print("No file found... creating one now\n")
		createLogfile(logFileName)
	end
	local readfile,err = io.open(logFileName,"r")
	if err then 
		return err
	end
	local newfile = {}
	for line in readfile:lines() do --print(line)
		if not string.match(line, player.Name) then             --this needs be changed some how.
			table.insert(newfile, line)
		end
	end
	readfile:close()
	local newentry = string.format("%-128s",line)                  --this needs changed
	table.insert(newfile,newentry)
	local writefile,err = io.open(logFileName,"w+")
	for k,v in pairs(newfile) do
		--printf("%s\n",v)
		writefile:write(v.."\n")
	end
	writefile:close()
end

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#23 Post by beanybabe » Thu Aug 13, 2015 12:38 pm

here is example of what I am doing I converted the Extinguish More Flames daily

Code: Select all

<?xml version="1.0" encoding="utf-8"?><waypoints type="RUN">
<onload>
function dlyExtinguishMoreFlames()
questtype = "daily"
   	userepeat       = false
	questItemId 	= 119791;
	questid 		= 425186;
	questname 		= GetIdName(questid);
	while true do
		player:moveTo(CWaypoint(-21567,-22960), true)
		player:target_NPC("Diandon")
		CompleteQuestByName(questname)
		local dailyQuestCount, dailyQuestsPerDay= RoMScript("Daily_count()");
		if 10 == dailyQuestCount then
			error("Dailys done for today. Ending script",2)
		else
			player:target_NPC("Diandon")
			AcceptQuestByName(questname,questtype)
	    		printf("Done "..dailyQuestCount.." of " .. dailyQuestsPerDay ..    " Left " .. dailyQuestsPerDay - dailyQuestCount .. " Quests.");
	  	 end
		player:moveTo(CWaypoint(-21663,-23233), true)
		repeat
			player:target_Object(questItemId)
		until getQuestStatus(questname) == "complete"
	end
end
-- End of functions
dlyExtinguishMoreFlames()
</onload>
</waypoints>

From this

Code: Select all

<?xml version="1.0" encoding="utf-8"?><waypoints>
<onload>
questtype = "daily"
    userepeat       = false
	questItemId 	= 119791;
	questid 		= 425186;
	questname 		= GetIdName(questid);
</onload>
	<!-- #  1 --><waypoint x="-21567" z="-22960" y="597"	type="TRAVEL">
	player:target_NPC("Diandon")
	CompleteQuestByName(questname)
	local dailyQuestCount, dailyQuestsPerDay= RoMScript("Daily_count()");
	if 10 == dailyQuestCount then
		error("Dailys done for today. Ending script",2)
	else
		player:target_NPC("Diandon")
		AcceptQuestByName(questname,questtype)
    	printf("Done "..dailyQuestCount.." of " .. dailyQuestsPerDay ..    " Left " .. dailyQuestsPerDay - dailyQuestCount .. " Quests.");
    end
	__WPL:setDirection(WPT_FORWARD);
	</waypoint>
	<!-- #  2 --><waypoint x="-21663" z="-23233" y="597" type="TRAVEL">	
	repeat
		player:target_Object(questItemId)
	until getQuestStatus(questname) == "complete"
	__WPL:setDirection(WPT_BACKWARD);
	</waypoint>
</waypoints>

User avatar
rock5
Posts: 12173
Joined: Tue Jan 05, 2010 3:30 am
Location: Australia

Re: waypoint stuff

#24 Post by rock5 » Fri Aug 14, 2015 4:50 am

I think you are missing some basics. The functions Lisa and Bill D Cat are providing can be put in an lua file and put into the userfunctions folder. Of course the name of the file needs to be valid. Then when the bot loads it will load those functions but all it will do is create the functions, it wont run them. So if you run the commandline waypoint file to start the command line then you can run those functions with the correct parameter.

If you want to run the functions without loading the bot (which is probably preferable as you don't need the bot to convert the waypoint file) then you can put the function in an lua file and place it in the scripts folder. In this case you would have to add a line after the function definition to run the function as well. Then you would run it from the mm prompt the same way you run the bot.
beanybabe wrote:If I am understanding this getElements the way you used it would not allow the line by line output of wp and code.
That's correct. It could return the contents of waypoints but I don't think it can return xml comments. But Lisa is right, it will be a bit tricky to make sure you parse the x, y and z values correctly. It should be possible though. Eg.

Code: Select all

local str = '<waypoint x="31978" z="-3441" y="1">'
local x = string.match(line,"x%s*=%s*\"(%-*%d*)")
local z = string.match(line,"z%s*=%s*\"(%-*%d*)")
local y = string.match(line,"y%s*=%s*\"(%-*%d*)")
local code = string.match(line,"<waypoint.->(.*)</waypoint>") or string.match(line,"<waypoint.->(.*)")
if x and z then
	if y then
		file:write("\tplayer:moveTo(CWaypoint("..x..", "..z..", "..y.."),true)\n")
	else
		file:write("\tplayer:moveTo(CWaypoint("..x..", "..z.."),true)\n");
	end
	if string.match(code,"[^%s]+") then
		file:write(code)
	end
else
	file:write(line)
end
This should be able to handle spaces around the x, y, z and =. It then writes the moveTo command, or if it it not the waypoint line, then it writes the original line. It even writes any code on the same line as the waypoint info.
  • Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
  • I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
  • How to: copy and paste in micromacro
    ________________________
    Quote:
    • “They say hard work never hurt anybody, but I figure, why take the chance.”
          • Ronald Reagan

User avatar
rock5
Posts: 12173
Joined: Tue Jan 05, 2010 3:30 am
Location: Australia

Re: waypoint stuff

#25 Post by rock5 » Fri Aug 14, 2015 7:29 am

Here is a more complete solution. Put it in the scripts folder.
convertWP.lua
(1.65 KiB) Downloaded 180 times
Here is some example usage.
Screen Shot 08-14-15 at 10.13 PM.JPG
And here is the test.xml file created.

Code: Select all

<waypoints>
	player:moveTo(CWaypoint(-3689, -7952),true)
	player:moveTo(CWaypoint(-3574, -8057),true)
	player:moveTo(CWaypoint(-3478, -8003),true)
	player:moveTo(CWaypoint(-3345, -7817),true)
player:restrnd(20, 2, 10);
	player:moveTo(CWaypoint(-3179, -7874),true)
	player:moveTo(CWaypoint(-2964, -7996),true)
	player:moveTo(CWaypoint(-2754, -8183),true)
	player:moveTo(CWaypoint(-2640, -7949),true)
player:harvest();
	player:moveTo(CWaypoint(-2816, -7990),true)
	player:moveTo(CWaypoint(-2940, -7957),true)
	player:moveTo(CWaypoint(-3080, -7816),true)
	player:moveTo(CWaypoint(-3207, -7829),true)
	player:moveTo(CWaypoint(-3357, -7761),true)
	player:moveTo(CWaypoint(-3410, -7627),true)
	player:moveTo(CWaypoint(-3556, -7525),true)
	player:moveTo(CWaypoint(-3670, -7448),true)
player:harvest();
	player:moveTo(CWaypoint(-3750, -7594),true)
	player:moveTo(CWaypoint(-3919, -7663),true)
	player:moveTo(CWaypoint(-3861, -7817),true)
	if( player.Level > 2 ) then
		loadPaths("demo2");
  	end
	</waypoint>
</waypoints>
  • Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
  • I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
  • How to: copy and paste in micromacro
    ________________________
    Quote:
    • “They say hard work never hurt anybody, but I figure, why take the chance.”
          • Ronald Reagan

User avatar
Bill D Cat
Posts: 555
Joined: Sat Aug 10, 2013 8:13 pm
Location: Deep in the Heart of Texas

Re: waypoint stuff

#26 Post by Bill D Cat » Fri Aug 14, 2015 8:10 am

The script creates an output file that starts with <waypoints> but ends with </waypoint></waypoints>. This would give a run-time error.

This section probably needs to make sure that the variable "line" is not just </waypoint> before writing it to the output file.

Code: Select all

	else
		saveFile:write(line.."\n")
	end

User avatar
rock5
Posts: 12173
Joined: Tue Jan 05, 2010 3:30 am
Location: Australia

Re: waypoint stuff

#27 Post by rock5 » Fri Aug 14, 2015 9:06 am

Well I think this is what Beanybabe asked for. I don't think he expected an executable file. I think he intended to then copy and paste bits to where he needs them.
  • Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
  • I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
  • How to: copy and paste in micromacro
    ________________________
    Quote:
    • “They say hard work never hurt anybody, but I figure, why take the chance.”
          • Ronald Reagan

User avatar
Bill D Cat
Posts: 555
Joined: Sat Aug 10, 2013 8:13 pm
Location: Deep in the Heart of Texas

Re: waypoint stuff

#28 Post by Bill D Cat » Fri Aug 14, 2015 9:26 am

True, but using it to convert a more complex file would end up making an output file that had numerous extraneous </waypoint> tags. Easy enough to do a search and replace to remove them.

noobbotter
Posts: 527
Joined: Fri Aug 31, 2012 1:15 pm

Re: waypoint stuff

#29 Post by noobbotter » Fri Aug 14, 2015 9:52 am

The main problem I see with this is if you use it to convert a waypoint file that has any "__WPL:setWaypointIndex()" commands in it, that wouldn't work. Also, how would it handle any waypoint reverse directions or travel types?

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#30 Post by beanybabe » Fri Aug 14, 2015 10:25 am

Nice that worked I see the /waypoints but don't mind them they help show were routines were when I go to clean up the code.

It would have took me a year to figure that out. I spent a year getting my drill path working well.

Thanks Lisa Bill Rock now I can make some magic. some are a bit hard to convert that use reverse wp but I managed to get one done. Now to see how may different daily's I can convert. then it should it will be easy to call whichever daily is needed for any char.

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#31 Post by beanybabe » Fri Aug 14, 2015 10:36 am

I open the files in side by side view in notepad++ and use its compare addon to help edit here is example.
Attachments
example edit.PNG

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#32 Post by beanybabe » Thu Aug 20, 2015 11:16 pm

reverse directions are pretty easy to handle.

i just use

While 1=1 do
wp 1
wp 2
i list the wp then list them again in reverse
wp 2
wp 1
and put some check if finished
end


This may not work to well for large wp but for ones with only only a few spots its easy.

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#33 Post by beanybabe » Thu Aug 20, 2015 11:23 pm

Here is an example of Daily flameseed daily a custom version i created this if first time its been posted. original and converted it used _reverse originally

Code: Select all

<?xml version="1.0" encoding="utf-8"?><waypoints type="RUN">
<onload>
function dlyExtinguishMoreFlames()
questtype = "daily"
    userepeat       = false
	questItemId 	= 119791;
	questid 		= 425186;
	questname 		= GetIdName(questid);
	while true do
		player:moveTo(CWaypoint(-21567,-22960), true)
		player:target_NPC("Diandon")
		CompleteQuestByName(questname)
		local dailyQuestCount, dailyQuestsPerDay= RoMScript("Daily_count()");
		if 10 == dailyQuestCount then
			error("Dailys done for today. Ending script",2)
		else
			player:target_NPC("Diandon")
			AcceptQuestByName(questname,questtype)
	    	printf("Done "..dailyQuestCount.." of " .. dailyQuestsPerDay ..    " Left " .. dailyQuestsPerDay - dailyQuestCount .. " Quests.");
	    end
		player:moveTo(CWaypoint(-21663,-23233), true)
		repeat
			player:target_Object(questItemId)
		until getQuestStatus(questname) == "complete"
	end
end
-- End of functions
dlyExtinguishMoreFlames()
</onload>
</waypoints>
this is what it started as

Code: Select all

<?xml version="1.0" encoding="utf-8"?><waypoints>
<onload>
questtype = "daily"
    userepeat       = false
	questItemId 	= 119791;
	questid 		= 425186;
	questname 		= GetIdName(questid);
function doquest()
	player:target_NPC("Diandon")
	CompleteQuestByName(questname)
end
	
</onload>
	<!-- #  1 --><waypoint x="-21567" z="-22960" y="597"	type="TRAVEL">
	doquest()
	local dailyQuestCount, dailyQuestsPerDay= RoMScript("Daily_count()");
	if 10 == dailyQuestCount then
		error("Dailys done for today. Ending script",2)
	else
		player:target_NPC("Diandon")
		AcceptQuestByName(questname,questtype)
    	printf("Done "..dailyQuestCount.." of " .. dailyQuestsPerDay ..    " Left " .. dailyQuestsPerDay - dailyQuestCount .. " Quests.");
    end
	__WPL:setDirection(WPT_FORWARD);
	</waypoint>
	<!-- #  2 --><waypoint x="-21663" z="-23233" y="597" type="TRAVEL">	
	repeat
		player:target_Object(questItemId)
	until getQuestStatus(questname) == "complete"
	__WPL:setDirection(WPT_BACKWARD);
	</waypoint>
</waypoints>

User avatar
beanybabe
Posts: 647
Joined: Wed Mar 06, 2013 1:27 am

Re: waypoint stuff

#34 Post by beanybabe » Thu Nov 26, 2015 3:18 pm

Thanks again rock for this convert script. It really helps make coding easier for me.

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 1 guest