Shaiya[US] - Shaiya Bot ZS

[Yorkshire]

Had to give up on this bot gutted cause i love this bot it just wont target at all if anyone can help me sort this out would be greatfull.hope theres a update soon zs.

[vvayinsane]

I gave up on this bot. I did iget it working somewhat but it wasnt very good. I have started using the fighter bot. Not as good as this bot but it works a WHOLE lot better

[Rishijin]

It works fine for me, except that sometimes it buffs without regard to the fact that it just buffed. It's a nice bot for being macro based.

Now, the fighter bot which seems to be what other people are using instead of this...I can't get that one to work lol.

[Rishijin]

Okay I ran into a problem using the waypoints.
I got the editor, and seemingly set it up right, and created a new waypoint chart using the editor. I named the map what it is called in game, I set the dimensions to 2047, and saved it in data folder.
When I run the bot, it has the following error when it tries to go to a waypoint.

Code: Select all

move_next_waypoint()
.//lib/utils.lua:49: attempt to perform arithmetic on field 'y' (a nil value)

I don't see what I would fix in utils.lua line 49, so I am stuck here.

[shakey]

I seem to be missing my config.ini

Can anyone post theirs up? I did a fresh install but it's missing.

[Administrator]

Okay I ran into a problem using the waypoints.
I got the editor, and seemingly set it up right, and created a new waypoint chart using the editor. I named the map what it is called in game, I set the dimensions to 2047, and saved it in data folder.
When I run the bot, it has the following error when it tries to go to a waypoint.

Code: Select all

move_next_waypoint()
.//lib/utils.lua:49: attempt to perform arithmetic on field 'y' (a nil value)

I don't see what I would fix in utils.lua line 49, so I am stuck here.

Add

Code: Select all

printf("points - A: %s, B: %s\n", point_a, point_b)

above line 47 ( "local l_d = {" ), save it, run it again. Post the results.

This script package is largely broken and hasn't been updated in a long time. Unless you're trying to fix it, I would suggest just using something else.

I seem to be missing my config.ini

Can anyone post theirs up? I did a fresh install but it's missing.

It's in the data folder.

[shakey]

That's where it SHOULD be.. but is not.

and now

Code: Select all

Mon Jul 06 15:47:41 2009 : MicroMacro v1.0
Mon Jul 06 15:47:41 2009 : Processor Type: 2X 586, OS: Windows Vista Service Pack 2
Mon Jul 06 15:47:41 2009 : LuaCoco is available.
Mon Jul 06 15:47:41 2009 : Lua glues exported.
Mon Jul 06 15:47:41 2009 : Keyboard layout: US English
Mon Jul 06 15:47:41 2009 : Executing script 'main.lua'
==================================================

Mon Jul 06 15:47:41 2009 : cannot open main.lua: No such file or directory
Mon Jul 06 15:47:41 2009 : Execution error: Error reading file

[Administrator]

Download the package again and re-extract it. You might also have faulty zip software. I've tested both packages, and they both contain config.xml in the data folder.

EDIT:
After extracting, you should have a zs_shaiya folder. Place this folder into micromacro/scripts/. Yes, you must put the whole folder; copying just the contents will not work, because the scripts use relative paths.

[shakey]

C:\Users\Jessica\Desktop\Chris\micromacro\scripts\zs_shaiya

It's in there. I re-re-re-extracted it and it's there now. But now I'm getting that main.lua error. grr

[Rishijin]

Add

Code: Select all

printf("points - A: %s, B: %s\n", point_a, point_b)

above line 47 ( "local l_d = {" ), save it, run it again. Post the results.

This is what I got.

Code: Select all

move_next_waypoint()
points - A: table: 00AE1F48, B: table: 00AB19F8
.//lib/utils.lua:50: attempt to perform arithmetic on field 'y' (a nil value)

Are these the mem addresses for the x and y?

This script package is largely broken and hasn't been updated in a long time. Unless you're trying to fix it, I would suggest just using something else.

I am indeed trying to fix it. It deserves to be fixed. I am also going to update it so that it doesn't use any keystrokes. I am new to this, but I am very determined to get it done. As is the help you've provided already, any further help would be greatly appreciated.

[shakey]

Code: Select all

Mon Jul 06 16:12:00 2009 : macro_init()
Mon Jul 06 16:12:00 2009 : Shaiya Window process ID: 853864
Mon Jul 06 16:12:00 2009 : findProcessByWindow() returned 0. Process not found or other error occured.
Mon Jul 06 16:12:00 2009 : Error attempting to open process 0x0. Error code: 87 (The parameter is incorrect.).
Mon Jul 06 16:12:00 2009 : findProcessByWindow() exited with error code 87 (The parameter is incorrect.).
Mon Jul 06 16:12:00 2009 : Error attempting to open process 0x0. Error code: 87 (The parameter is incorrect.).
Mon Jul 06 16:12:00 2009 : win_width: 1680, win_height: 1000


stack traceback:
	...:\Users\Jessica\Desktop\Chris\micromacro\lib\lib.lua:536: in function 'startMacro'
	scripts\zs_shaiya\main.lua:175: in main chunk

----------TRACEBACK END----------

Mon Jul 06 16:12:00 2009 : scripts/zs_shaiya/classes/hook.lua:126: bad argument #1 to 'memoryReadString' ((null))
Mon Jul 06 16:12:00 2009 : Execution error: Runtime error

I fixed my main path error. But now this damned thing.

[Rishijin]

I think you might be trying to use too high of a resolution for one thing.
I've gotten this to work using 1024x768 and 800x600.
As for the other stuff, I'm not sure.

[shakey]

Yeah, I just cut it down to 1280x1024 and am still getting the same thing.

[shakey]

Nope, tried, 800x600 and 1024x768 also.


At one point I had this supporting ALL resolutions. But alas. EP kicked my nuts.

[Rishijin]

Did you disable Game Guard?

[shakey]

Yup.

[Administrator]

That error does indicate that it was unable to find the window. This could be because of GameGuard, your anti-virus software, or because the window name changed.

Edit: My mistake; read it wrong. It found the window, but was unable to find the process that owned that window.

[Rishijin]

If on vista, you might want to check to see if you are running it with privileges.

[shakey]

Mind posting a link to a known NO-gg? I made my own so it's possible it's still active. And I'll run it with admin again, just to check.

[Administrator]

This should work: http://www.solarstrike.net/phpBB3/viewt ... f=23&t=349