Can you post the name and place where I can find the mob. Then i will take a look.CrazyGuy wrote:Well the one thing that when i say a Friendly mob, besides being on the friends list its a non-aggressive mob, so the only way the mob is going to be aggressive towards the bot is if the bot attacks the mob - what it is doing/shouldnt be. A non-aggressive mob on the friends list shouldnt ever attack, since the friends list says to ignore the mob, and the mob wont ever aggro you first. Im not using any AOE skills either.
RoM bot
Re: RoM bot
The RoM Bot Online Wiki needs your help!
-
- Posts: 12
- Joined: Thu Sep 24, 2009 7:18 pm
Re: RoM bot
im find that sometimes a non-aggressive mob attack me when i cast a buff near him
i think this is a rom's bug itself
i think this is a rom's bug itself
-
- Posts: 58
- Joined: Mon Jul 27, 2009 8:04 pm
Re: RoM bot
i have set up ...
the code is for my priest and the 2,1 is for rising tide ...
i get an error every time when i run it with that code in my profile .... this if( player.Level == 2 ) then confuses me does that need to be the level of my character all the time? or can it be left the same?
also can i have more than one of those level skill up codes or can you only have 1 in there?
Code: Select all
<onLeaveCombat>
if( player.Level > player.free_counter1) then
player.free_counter1 = player.Level;
-- levelup skills
if( player.Level == 2 ) then
send_macro("SetSpellPoint( 2, 1 );");
yrest(1000);
send_macro("SetSpellPoint( 2, 1 );");
else
player.free_counter1 = player.Level;
send_macro("SetSpellPoint( 2, 1 );");
end
</onLeaveCombat>
i get an error every time when i run it with that code in my profile .... this if( player.Level == 2 ) then confuses me does that need to be the level of my character all the time? or can it be left the same?
also can i have more than one of those level skill up codes or can you only have 1 in there?
Re: RoM bot
They level 2 condition is, because we need two levelups at player level 2.copenhagen69 wrote:the code is for my priest and the 2,1 is for rising tide ...
i get an error every time when i run it with that code in my profile .... this if( player.Level == 2 ) then confuses me does that need to be the level of my character all the time? or can it be left the same?
also can i have more than one of those level skill up codes or can you only have 1 in there?
Yes, you can levelup more then one skill at one time.
What error message do you get?
The RoM Bot Online Wiki needs your help!
-
- Posts: 58
- Joined: Mon Jul 27, 2009 8:04 pm
Re: RoM bot
ok, there is a missing 'end'. If should becopenhagen69 wrote: is the error i get when i use that code i posted above...
Code: Select all
<onLeaveCombat>
if( player.Level > player.free_counter1) then
player.free_counter1 = player.Level;
-- levelup skills
if( player.Level == 2 ) then
send_macro("SetSpellPoint( 2, 1 );");
yrest(1000);
send_macro("SetSpellPoint( 2, 1 );");
else
player.free_counter1 = player.Level;
send_macro("SetSpellPoint( 2, 1 );");
end
end
</onLeaveCombat>
The RoM Bot Online Wiki needs your help!
-
- Posts: 58
- Joined: Mon Jul 27, 2009 8:04 pm
Re: RoM bot
ah ok ... there we go ...
one other thing ... do i need to change the player level or just leave it at 2?
one other thing ... do i need to change the player level or just leave it at 2?
-
- Posts: 11
- Joined: Tue Jul 07, 2009 3:09 pm
Re: RoM bot
i have a small problem, i think i've saw the problem before, just didn't find solution.
when i write rom\createpath.lua to create new path for player, the game freezes and it says to me that error (send, cancel) and kicks me out of the game...
anyone can tell where the problem is?
PS: another bot is running just fine with his setup...
when i write rom\createpath.lua to create new path for player, the game freezes and it says to me that error (send, cancel) and kicks me out of the game...
anyone can tell where the problem is?
PS: another bot is running just fine with his setup...
Re: RoM bot
Some of your RoM Configurations data are corruped. Just delete the charactername folder in '/my documents/Runes of Magic/'.runedancer wrote:i have a small problem, i think i've saw the problem before, just didn't find solution.
when i write rom\createpath.lua to create new path for player, the game freezes and it says to me that error (send, cancel) and kicks me out of the game...
anyone can tell where the problem is?
PS: another bot is running just fine with his setup...
The RoM Bot Online Wiki needs your help!
Re: RoM bot
I've found a problem. My character walks from waypoint #1 to waypoint #2, at this time the bot casts MAGE_ELECTROSTATIC_CHARGE. In this case the character stops and then the bot tries to unstick it. Sometimes this action causes problems.
Re: RoM bot
Which SVN version? Since SVN 313 the unstick time will be set back also while casting friendly skills while moving between waypoints.x_art wrote:I've found a problem. My character walks from waypoint #1 to waypoint #2, at this time the bot casts MAGE_ELECTROSTATIC_CHARGE. In this case the character stops and then the bot tries to unstick it. Sometimes this action causes problems.
The RoM Bot Online Wiki needs your help!
Re: RoM bot
I have tried the auto skill increase above and i get an error
rom/classes/player.lua:701:Error in your profile: onLeaveCombat error: [string "..."]:12: attempt to call global 'send_macro' <a nil value>
i use the default profile with that script added in the OnLeaveCombat area
rom/classes/player.lua:701:Error in your profile: onLeaveCombat error: [string "..."]:12: attempt to call global 'send_macro' <a nil value>
i use the default profile with that script added in the OnLeaveCombat area
Re: RoM bot
UseMrjones wrote::12: attempt to call global 'send_macro' <a nil value>
Code: Select all
sendMacro();
The RoM Bot Online Wiki needs your help!
-
- Posts: 10
- Joined: Wed Sep 30, 2009 5:54 pm
Re: RoM bot
I know this is my first post here, but please hear me out. First of all I think you guys are doing a great job with this bot and keeping updated. It's just that since the Tuesday patch came out my resurrect macro doesn't work anymore.
The code I found in the macro after it attempts the key press is
I'm thinking if that is correct then they changed something in the ROM api. I tried the "old macro" of wait 1, acceptressurect (or whatever it was) and that didn't work either.
Any ideas?
(I also tried a fresh install of ROM, and SVN updated everything.)
The code I found in the macro after it attempts the key press is
Code: Select all
/script r='' a={AcceptResurrect();} for i=1,#a do if a[i] then r=r..tostring(a[i]) end r=r..' ' end EditMacro(2,'',7,r);
Any ideas?
(I also tried a fresh install of ROM, and SVN updated everything.)
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Looks like they removed the AcceptResurrect() function. Nothing we can do about that.
-
- Posts: 10
- Joined: Wed Sep 30, 2009 5:54 pm
Re: RoM bot
Well damn. The way the bot works on my system relied heavily on the resurrect macro. The simulated mouse clicks always missed the resurrect dialog box so it always used the macro.
Any suggestions on what to do from here?
Any suggestions on what to do from here?
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
What resolution do you use? That might have to do with why the mouse clicks were missing.
Re: RoM bot
The mouse clicks was removed in one of the last SVNs. So I would recommend to update to the last SVN. And my resurecct worked ... yesterday and the day before?coolgangsta wrote:Well damn. The way the bot works on my system relied heavily on the resurrect macro. The simulated mouse clicks always missed the resurrect dialog box so it always used the macro
The RoM Bot Online Wiki needs your help!
-
- Posts: 10
- Joined: Wed Sep 30, 2009 5:54 pm
Re: RoM bot
My script IS fully updated (316). I tried some more tinkering around this morning and I'm still running into the same problem. I can't find any mention of that particular API function being removed anywhere.
Is anyone out there having the same problem with the acceptresurrect function?
Is anyone out there having the same problem with the acceptresurrect function?
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Yes, I entered '/script AcceptResurrect()' into chat and it didn't work for me either.
Who is online
Users browsing this forum: Ahrefs [Bot] and 10 guests