-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#21
Post
by wiedzmin97 » Mon Aug 11, 2014 8:34 am
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
LoginNextChar
Changing to character 1 account 62.
Player address changed: 0x43F25F00
Its seems that it gets stuck before player update.
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#22
Post
by rock5 » Mon Aug 11, 2014 8:58 am
Ok then. The last message about the character address changing comes from a player:update(). LoginNextChar uses ChangeChar and at the end of ChangeChar there is a player:update() and this line
Code: Select all
CurrentLoginServer = RoMScript ("GetCurrentRealm()")
So it's getting stuck in the player:update() or when running that RoMScript.
Here is a version of player.lua that prints some numbers to help narrow down the location of the bug. Please try it and show me the printout when it gets stuck.
-- Obsolete file removed --
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#23
Post
by wiedzmin97 » Mon Aug 11, 2014 9:21 am
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
LoginNextChar
Changing to character 1 account 62.
Player address changed: 0x422B6400
1
2
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#24
Post
by rock5 » Mon Aug 11, 2014 10:53 am
Between 2 and 3 there are no loops but 2 functions it could get stuck in. I don't think it could be
settings.loadSkillSet so it's most likely the
.
The RoMCode basically just uses the RoMScript function. The RoMScript function is huge so I'll have to add a few prints to narrow it down further.
First revert the changes you've already done in player.lua and then use this version of functions.lua that has print messages in the RoMScript function. Again, when it gets stuck copy the output here. If there is a print message in the loop that it gets stuck at then it will repeatedly print. Just stop it then copy the output here.
-- Obsolete file removed --
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#25
Post
by wiedzmin97 » Mon Aug 11, 2014 11:04 am
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
1 LogID
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true 61
9 61
1 CHARACTER_SELECT.selectedIndex
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true 1
9 1
1 GetCurrentRealm()
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true Angel City
9 Angel City
Moving to waypoint #1, (-7134, -3952)
Use MACRO: PRIEST_GRACE_OF_LIFE1 } CastSpellByName("Grace of Life"); if t
ype(a)~="table" then a={a} end z={
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true
9
=> <UNKNOWN> (0/1000)
LoginNextChar
1 LogID
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true 61
9 61
1 CHARACTER_SELECT.selectedIndex
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true 1
9 1
1 fastLoginNumChars
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true 1
9 1
1 CharsLoadedCount
2
4 154140672
5 CommandMacro 1
6 false 116
7
8 true 16
9 16
Changing to character 1 account 62.
Player address changed: 0x38050000
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#26
Post
by rock5 » Mon Aug 11, 2014 11:43 am
There are no print messages after the address change. That means it never reached the RoMCode after it. Maybe it is the settings.loadSkillSet. I can't really see where it would get stuck in that function. This is getting frustrating. Seeing as settings.loadSkillSet has to do with the profile, have you tried using the default profile?
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#28
Post
by wiedzmin97 » Mon Aug 11, 2014 12:25 pm
I have tried to download clean MicroMacro and RomBot, i have installed it (without updating via SVN).
And now everything is working good...
@edit
when i updated it to newest revision, it does not work again...
Last edited by
wiedzmin97 on Mon Aug 11, 2014 12:31 pm, edited 1 time in total.
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#29
Post
by rock5 » Mon Aug 11, 2014 12:30 pm
I guess we'll have to try some print messages in settings.loadSkillSet. Revert functions.lua and then try this file.
-- Obsolete file removed --
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#30
Post
by wiedzmin97 » Mon Aug 11, 2014 12:39 pm
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
LoginNextChar
Changing to character 1 account 62.
Player address changed: 0x29A73700
1 6
2
3
4 setupmacro
5
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#31
Post
by rock5 » Mon Aug 11, 2014 1:07 pm
Ok, that narrows it down to the GetSkillBookData function. Damn another function. Will we ever narrow it down to 1 line of code? Grrr...
Revert settings.lua and try this version of functions.lua.
-- Obsolete file removed --
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#32
Post
by wiedzmin97 » Mon Aug 11, 2014 1:15 pm
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
LoginNextChar
Changing to character 1 account 62.
Player address changed: 0x29A73C00
1 2 3 4
2
3
3.1 2 608 76
3.2
3.3 490148
3.4
3.2
3.3 490151
3.4
3.2
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#33
Post
by rock5 » Mon Aug 11, 2014 1:31 pm
What's the 3rd skill on the second tab of your skills (when you press K)? Do you only get stuck with knights?
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#34
Post
by wiedzmin97 » Mon Aug 11, 2014 1:37 pm
Not only with knights, i have just all chars (different classes) with 10-20 lvls.
3rd skill is : Punishment
On the next char with class Scout i have something that:
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
Use MACRO: KNIGHT_ENHANCED_ARMO=> <UNKNOWN> (0/1000)
Use MACRO: KNIGHT_HOLY_POWER_EX=> Dpstwo (897/897)
LoginNextChar
Changing to character 1 account 63.
Player address changed: 0x49939100
1 2 3 4
2
3
3.1 2 684 76
3.2
And also it gets stuck. When i will open second tab of my skills, its starting work
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#35
Post
by rock5 » Mon Aug 11, 2014 2:31 pm
I did some changes to GetIdName recently and I might have introduced a bug. The reason it works when you open the skills is because there is a step in GetIdName where it executes a command to force information about an id to appear in memory. Obviously this is not working. When you open the skills it also makes the id info appear in memory.
Revert the last file and try this one. This one will print a LOT of print outs.
Wow, look at the time. It's bed time for me. I'll check back tomorrow.
-- Obsolete file removed --
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#36
Post
by wiedzmin97 » Mon Aug 11, 2014 2:46 pm
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
1 490290
4 266165600 55321664
5 490290 490290
6 1245427712
7 1245427712
1 497955
4 250319936 55321664
5 512047 497955
4 251032320 55321664
5 224096 497955
4 251949824 55321664
5 232288 497955
4 266664768 55321664
5 493123 497955
4 264942304 55321664
5 503123 497955
4 264745696 55321664
5 501075 497955
4 266926912 55321664
5 495171 497955
4 267123520 55321664
5 497219 497955
4 263926496 55321664
5 500051 497955
4 267090752 55321664
5 498243 497955
4 267107136 55321664
5 497731 497955
4 267098944 55321664
5 497987 497955
4 267103040 55321664
5 497859 497955
4 267100992 55321664
5 497923 497955
4 267099968 55321664
5 497955 497955
6 0
7 1021185024
1 490290
4 266165600 55321664
5 490290 490290
6 1245427712
7 1245427712
1 497956
4 250319936 55321664
5 512047 497956
4 251032320 55321664
5 224096 497956
4 251949824 55321664
5 232288 497956
4 266664768 55321664
5 493123 497956
4 264942304 55321664
5 503123 497956
4 264745696 55321664
5 501075 497956
4 266926912 55321664
5 495171 497956
4 267123520 55321664
5 497219 497956
4 263926496 55321664
5 500051 497956
4 267090752 55321664
5 498243 497956
4 267107136 55321664
5 497731 497956
4 267098944 55321664
5 497987 497956
4 267103040 55321664
5 497859 497956
4 267100992 55321664
5 497923 497956
4 267099968 55321664
5 497955 497956
4 267099456 55321664
5 497971 497956
4 267099712 55321664
5 497963 497956
4 267099840 55321664
5 497959 497956
4 267099904 55321664
5 497957 497956
4 267099936 55321664
5 497956 497956
6 0
7 1021221888
1 500517
4 264763552 55321664
5 500517 500517
6 941948928
7 941948928
1 507217
4 265335584 55321664
5 507217 507217
6 968948736
7 968948736
1 622704
4 265749856 55321664
5 622704 622704
6 968947712
7 968947712
1 500517
4 264763552 55321664
5 500517 500517
6 941948928
7 941948928
1 490290
4 266165600 55321664
5 490290 490290
6 1245427712
7 1245427712
1 497955
4 267099968 55321664
5 497955 497955
6 1021185024
7 1021185024
1 490290
4 266165600 55321664
5 490290 490290
6 1245427712
7 1245427712
1 497956
4 267099936 55321664
5 497956 497956
6 1021221888
7 1021221888
1 500517
4 264763552 55321664
5 500517 500517
6 941948928
7 941948928
1 507217
4 265335584 55321664
5 507217 507217
6 968948736
7 968948736
1 622704
4 265749856 55321664
5 622704 622704
6 968947712
7 968947712
1 500517
4 264763552 55321664
5 500517 500517
6 941948928
7 941948928
LoginNextChar
Changing to character 1 account 62.
Player address changed: 0x2B4A4600
1 500141
4 250319936 55321664
5 512047 500141
4 251032320 55321664
5 224096 500141
4 251949824 55321664
5 232288 500141
4 266664768 55321664
5 493123 500141
4 264942304 55321664
5 503123 500141
4 264745696 55321664
5 501075 500141
4 266926912 55321664
5 495171 500141
4 267123520 55321664
5 497219 500141
4 263926496 55321664
5 500051 500141
4 264762080 55321664
5 500563 500141
4 263918304 55321664
5 500307 500141
4 263922400 55321664
5 500179 500141
4 263924448 55321664
5 500115 500141
4 263923424 55321664
5 500147 500141
4 263923936 55321664
5 500131 500141
4 263923680 55321664
5 500139 500141
4 263923552 55321664
5 500143 500141
4 263923616 55321664
5 500141 500141
6 1210924032
7 1210924032
1 622704
4 265749856 55321664
5 622704 622704
6 968947712
7 968947712
1 490148
4 250319936 55321664
5 512047 490148
4 251032320 55321664
5 224096 490148
4 251949824 55321664
5 232288 490148
4 266664768 55321664
5 493123 490148
4 259730304 55321664
5 242306 490148
4 293973024 55321664
5 423148 490148
4 266468160 55321664
5 491075 490148
4 294235168 55321664
5 425196 490148
4 266173248 55321664
5 490051 490148
4 266156864 55321664
5 490563 490148
4 266165056 55321664
5 490307 490148
4 266169152 55321664
5 490179 490148
4 266171200 55321664
5 490115 490148
4 266170176 55321664
5 490147 490148
4 266169664 55321664
5 490163 490148
4 266169920 55321664
5 490155 490148
4 266170048 55321664
5 490151 490148
4 266170112 55321664
5 490149 490148
4 266170144 55321664
5 490148 490148
6 515622912
7 515622912
4 266170144 55321664
5 490148 490148
6 515622912
7 515622912
1 490151
4 266170048 55321664
5 490151 490151
6 515620864
7 515620864
4 266170048 55321664
5 490151 490151
6 515620864
7 515620864
1 490159
4 250319936 55321664
5 512047 490159
4 251032320 55321664
5 224096 490159
4 251949824 55321664
5 232288 490159
4 266664768 55321664
5 493123 490159
4 259730304 55321664
5 242306 490159
4 293973024 55321664
5 423148 490159
4 266468160 55321664
5 491075 490159
4 294235168 55321664
5 425196 490159
4 266173248 55321664
5 490051 490159
4 266156864 55321664
5 490563 490159
4 266165056 55321664
5 490307 490159
4 266169152 55321664
5 490179 490159
4 266171200 55321664
5 490115 490159
4 266170176 55321664
5 490147 490159
4 266169664 55321664
5 490163 490159
4 266169920 55321664
5 490155 490159
4 266169792 55321664
5 490159 490159
6 0
Yea its also time for bed
wow its for me really "black magic"
when i see these all digits... ^^
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#37
Post
by rock5 » Mon Aug 11, 2014 3:03 pm
Ok last post before bed.
So we've narrowed it down to this code.
Code: Select all
SlashCommand("/script GetCraftRequestItem(".. IdToFind ..",-1)")
-- Wait until data address appears
repeat
yrest(5)
address = memoryReadUInt( proc, AddresslineTree[addressline][4] + 0x8)
until address ~= 0
It's obviously getting stuck in the loop waiting for the address to appear in memory after the SlashCommand but for some reason it didn't work. I'm not sure yet what to make of this. I'll sleep on it and get back to you tomorrow.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#38
Post
by rock5 » Tue Aug 12, 2014 1:27 am
Ok I've come up with 2 solutions.
Firstly one of the changes I made to memorytable.lua recently was to use SlashCommand instead of RoMScript in that bit of code I posted because SlashCommand is faster. Besides being faster it is missing the checks that RoMScript has to see if the Command and Result macro have moved as happens when you change character. So the first fix I did was to copy those checks from RoMScript to SlashCommand.
Next I added a timer to the waiting loop to have it try again if it fails. If the previous fix fixes it I probably wont include this fix when I commit.
This time there are 2 files, functions.lua which has the extra checks added to SlashCommand, and memorytable.lua which has the timer added to the wait. Each fix has 1 print message that should trigger if 1 of those fixes is used so I'd like to know which one gets printed. If the bot doesn't get stuck stop it just after it finished changing character and copy the output here.
I'm crossing my fingers.
-
Attachments
-
- memorytable.lua
- (7.56 KiB) Downloaded 191 times
-
- functions.lua
- (89.59 KiB) Downloaded 182 times
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
-
wiedzmin97
- Posts: 44
- Joined: Wed Jul 03, 2013 1:37 pm
#39
Post
by wiedzmin97 » Tue Aug 12, 2014 8:58 am
Code: Select all
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
LoginNextChar
Changing to character 1 account 62.
Player address changed: 0x38166900
Trying again in GetItemAddress
No ranged skills specified in profile; Turning COMBAT_RANGED_PULL off.
Maximum range of range attack skills is less than COMBAT_DISTANCE 200. Reducing
COMBAT_DISTANCE setting to 50.
player update
loadProfile
No ranged skills specified in profile; Turning COMBAT_RANGED_PULL off.
Maximum range of range attack skills is less than COMBAT_DISTANCE 200. Reducing
COMBAT_DISTANCE setting to 50.
We read the hotkey settings from your bindings.txt file C:\Users\XXX\Moje doku
menty\Runes of Magic\bindings.txt instead of using the settings.xml file.
Loading profile Dpstwo.xml
Testing 'ingamefunctions' macro. If it gets stuck here, please update the 'ingam
efunctions' by copying the 'ingamefunctions' folder from 'rom/devtools' to the g
ames 'interface/addons' folder.
MACRO Test: ok
No ranged skills specified in profile; Turning COMBAT_RANGED_PULL off.
Maximum range of range attack skills is less than COMBAT_DISTANCE 200. Reducing
COMBAT_DISTANCE setting to 50.
loadPaths
Loaded waypoint path heffner.xml
No return path with default naming heffner_return.xml found.
We use the normal waypoint path heffner.xml now.
Moving to waypoint #1, (-7134, -3952)
Use MACRO: KNIGHT_ENHANCED_ARMO=> <UNKNOWN> (0/1000)
Use MACRO: KNIGHT_HOLY_POWER_EXPaused. (Delete) to continue, (CTRL+L) exit to sh
ell, (CTRL+C) quit
So, i see only one new printed message:
-
rock5
- Posts: 12173
- Joined: Tue Jan 05, 2010 3:30 am
- Location: Australia
#40
Post
by rock5 » Tue Aug 12, 2014 10:02 am
Ok, thanks. I was hoping it wouldn't be that one but anyway...
Thanks for your patience while we worked this out. Hopefully it will help avoid future users having the same issue. The files you have now should do you until I commit. When I do you'll probably have to do a revert after you update to clear any conflicts.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:
- “They say hard work never hurt anybody, but I figure, why take the chance.”
Who is online
Users browsing this forum: Bing [Bot] and 5 guests