RoM bot
Re: RoM bot
I'm not getting any swaying behaviour but I am getting the:
Target attackable: true
and then he just stops and stares at the mob. My profile is the simplest possible profile though because I have nbuff and my killing macro is a complete ingame ridiculously complex macro lol.
I have noticed something that might help you fix it though? Basically as soon as you cast a skill, whether it's a buff or just use a skill of some description, the bot starts trying to kill the mob again. So if you're watching and the bot stops, cast a skill like regen and it'll start working again fine.
Not sure how that'll help but it might ^^.
Kiz
Target attackable: true
and then he just stops and stares at the mob. My profile is the simplest possible profile though because I have nbuff and my killing macro is a complete ingame ridiculously complex macro lol.
I have noticed something that might help you fix it though? Basically as soon as you cast a skill, whether it's a buff or just use a skill of some description, the bot starts trying to kill the mob again. So if you're watching and the bot stops, cast a skill like regen and it'll start working again fine.
Not sure how that'll help but it might ^^.
Kiz
-
- Posts: 10
- Joined: Fri Feb 27, 2009 6:07 pm
Re: RoM bot
deedly wrote:I play a 38/26 R/P
I just use shadowstab, low blow and wound attack.
priest regenerate on 70% HP and HP pot on 40%
It is working good for me, but there is probably a better setup out there
Where do you set it for a heal spell at a certain percent and a potion at a different percent?
Re: RoM bot
new rom works so bad. even canot get waypoints i saved.
and stack some skill, donot do anything.
and stack some skill, donot do anything.
Re: RoM bot
It seems to be centered around the waypoint/movement. By the way the OnLeaveCombat works great.
Here is what MM1.0 spits out:
RoM Bot Version 2.23
playerAddr: 0x41F87D00
playerTarget: 0x41F87D00
Moving to (-12247, -3287)
Dist break.
Waypoint movement failed!
Moving to (-12247, -3287)
Dist break.
Waypoint movement failed!
Moving to (-12247, -3287)
Stopping waypoint::target acquired
Waypoint movement failed!
Dist breaks reset
Engaging enemy in combat...
Target attackable: true
Moving in | Suggested range: 45 | Distance: 180
Casting 'ROGUE_SHADOWSTAB', level 1, mana: 0
Casting 'ROGUE_LOW_BLOW', level 1, mana: 0
Casting 'ROGUE_WOUND_ATTACK', level 1, mana: 0
Target HP changed
Casting 'ROGUE_SHADOWSTAB', level 1, mana: 0
Casting 'ROGUE_LOW_BLOW', level 1, mana: 0
Target dead/lost
Moving to (-12247, -3287)
Stopping waypoint::target acquired
Waypoint movement failed!
Engaging enemy in combat...
Target attackable: true
Moving in | Suggested range: 45 | Distance: 199
Moving in | Suggested range: 45 | Distance: 150
Paused. Press Delete again to continue.
Here is what MM1.0 spits out:
RoM Bot Version 2.23
playerAddr: 0x41F87D00
playerTarget: 0x41F87D00
Moving to (-12247, -3287)
Dist break.
Waypoint movement failed!
Moving to (-12247, -3287)
Dist break.
Waypoint movement failed!
Moving to (-12247, -3287)
Stopping waypoint::target acquired
Waypoint movement failed!
Dist breaks reset
Engaging enemy in combat...
Target attackable: true
Moving in | Suggested range: 45 | Distance: 180
Casting 'ROGUE_SHADOWSTAB', level 1, mana: 0
Casting 'ROGUE_LOW_BLOW', level 1, mana: 0
Casting 'ROGUE_WOUND_ATTACK', level 1, mana: 0
Target HP changed
Casting 'ROGUE_SHADOWSTAB', level 1, mana: 0
Casting 'ROGUE_LOW_BLOW', level 1, mana: 0
Target dead/lost
Moving to (-12247, -3287)
Stopping waypoint::target acquired
Waypoint movement failed!
Engaging enemy in combat...
Target attackable: true
Moving in | Suggested range: 45 | Distance: 199
Moving in | Suggested range: 45 | Distance: 150
Paused. Press Delete again to continue.
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
For those of you having this problem:
Re-download the MicroMacro 1.0 beta and install that. It should, hopefully, fix the problems you're having. Download it here: http://solarimpact.servegame.com/phpBB3 ... ?f=6&t=177
As far the other problems, I believe most of it is caused by changes in the casting system. I'll fix it as soon as I can.
Code: Select all
...\lib\mods\xml.lua:174: attempt to concatenate field '_value' <a nil value>
As far the other problems, I believe most of it is caused by changes in the casting system. I'll fix it as soon as I can.
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Bot version 2.24 uploaded. There was a few minor improvements (that Mages will sure like [hint: Lightning is a bit more useful now, and you won't lead with Fireball if you have Flame set as a skill]), and many of the bugs in the last version should now be fixed. Please report any problems you have.
Re: RoM bot
New patch today bot isn't working (addresses changed again probably)Administrator wrote:Please report any problems you have.
Re: RoM bot
Is it possible to teach us how to figure out those addresses, or is it too much hassle for non-experienced people?
Thank you.
Thank you.
Re: RoM bot
WARNING: Failure reading memory from 0xD6FDB0 at 0x878b70 in memoryReadIntPtr().
Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
was completed.)
G:/micromacro/scripts/rom/classes/player.lua:14: attempt to perform arithmetic o
n field 'Address' (a nil value)
new 1821
im sure we will see many of this right up to release on the 19th.
Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
was completed.)
G:/micromacro/scripts/rom/classes/player.lua:14: attempt to perform arithmetic o
n field 'Address' (a nil value)
new 1821
im sure we will see many of this right up to release on the 19th.
-
- Posts: 25
- Joined: Fri Mar 06, 2009 1:32 pm
Re: RoM bot
Same prob here this 2.24 rombot...
Code: Select all
Tue Mar 17 07:35:20 2009 : MicroMacro v1.0
Tue Mar 17 07:35:20 2009 : Processor Type: 2X 586, OS: Windows Vista | Windows Server 2008 Service Pack 1
Tue Mar 17 07:35:20 2009 : LuaCoco is available.
Tue Mar 17 07:35:20 2009 : Lua glues exported.
Tue Mar 17 07:35:20 2009 : Keyboard layout: US English
Tue Mar 17 07:35:28 2009 : Executing script 'bot.lua'
==================================================
Tue Mar 17 07:35:31 2009 : RoM Bot Version 2.24
Tue Mar 17 07:35:31 2009 : WARNING: Failure reading memory from 0x27FFDB4 at 0x878b70 in memoryReadIntPtr(). Error code 299 (Seule une partie d'une requête ReadProcessMemory ou WriteProcessMemory a été effectuée.)
stack traceback:
C:\Users\Syrian\Desktop\micromacro\lib\lib.lua:512: in function 'startMacro'
scripts\rom/bot.lua:152: in main chunk
----------TRACEBACK END----------
Tue Mar 17 07:35:31 2009 : ...an/Desktop/micromacro/scripts/rom/classes/player.lua:14: attempt to perform arithmetic on field 'Address' (a nil value)
Tue Mar 17 07:35:31 2009 : Execution error: Runtime error
Re: RoM bot
ditokokowiki wrote:Is it possible to teach us how to figure out those addresses, or is it too much hassle for non-experienced people?
Thank you.
-
- Posts: 8
- Joined: Wed Mar 11, 2009 1:48 am
Re: RoM bot
Yeh, if we all knew how to do that it would save you a lot of time reading "Why ain't this working." posts.
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Version 2.25 for game version 1821 has been uploaded. This will be the last update until release.
For those of you that want to look up the pointers yourself, all of the information has already been made available. Find your HP, then look up a pointer to it (the address should be close to 0x328). The first address found should be right, so now look up the pointer to that. The offset should be something like 0x56C. You've now got your static base.
For those of you that want to look up the pointers yourself, all of the information has already been made available. Find your HP, then look up a pointer to it (the address should be close to 0x328). The first address found should be right, so now look up the pointer to that. The offset should be something like 0x56C. You've now got your static base.
Re: RoM bot
thanks for the update, gonna test it right away
-
- Posts: 8
- Joined: Wed Mar 11, 2009 1:48 am
Re: RoM bot
Before I even try it out, just wanted to log in and say, "You da' man." Take it easy, until next time, adios.
-
- Posts: 5
- Joined: Sat Mar 14, 2009 8:08 pm
Re: RoM bot
Thanks a lot for this bot
I got a mysterious error (may be I did something wrong..)
"unsticking player"
Can someone help me ? thanks
I got a mysterious error (may be I did something wrong..)
"unsticking player"
Can someone help me ? thanks
-
- Posts: 25
- Joined: Fri Mar 06, 2009 1:32 pm
Re: RoM bot
Ty admin for your great work Bot run really ok for me ty a lot!
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
No, because you provided absolutely no information about the problem. It's essentially like saying to a mechanic, "My car isn't working. What's wrong?"mauricemouth wrote:Thanks a lot for this bot
I got a mysterious error (may be I did something wrong..)
"unsticking player"
Can someone help me ? thanks
-
- Posts: 5
- Joined: Sat Mar 14, 2009 8:08 pm
Re: RoM bot
Forgot, I'm the noob of the year...
settings were not correct...
Sorry..
settings were not correct...
Sorry..
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
If you could, be more specific. Others that follow may have the same problem.
Who is online
Users browsing this forum: Ahrefs [Bot] and 145 guests